Tell Me, Show Me

Q. Show me how you would set the demister controls to clear all the windows effectively, this should include both front and rear screens

A. Set all relevant controls including; fan, temperature, air direction / source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstration.
 

Q. Tell me how you would know if there was a problem with your anti lock braking system

A. Warning light should illuminate if there is a fault with the anti lock braking system.
 

Q. Show me how you switch your headlight from dipped to main beam and explain how you would know the main beam is on whilst inside the car.

A. Operate switch (with ignition or engine on if necessary), check with main beam warning light.
 

Q. Tell me how you would check that the brakes are working before starting a journey.

A. Pedal should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side as you perform your normal braking.
 

Q. Tell me how you would check the tyres to ensure they have sufficient tread depth and their general condition is safe to use on the road.

A. There MUST be no cuts or bulges, a MINIMUM OF 1.6mm of tread depth across the central element of the breadth of the tyre and around the entire outer circumference.